GUANGZHOU NPP POWER CO., LTD
NO.67, Lianglong Road
Huashan Town
Huadu District
Guangzhou
Guangdong Province
P. R. China
Tel: +86 20-37887390
Email: info@npplithium.com
GUANGZHOU NPP POWER CO., LTD
NO.67, Lianglong Road
Huashan Town
Huadu District
Guangzhou
Guangdong Province
P. R. China
Tel: +86 20-37887390
Email: info@npplithium.com
Lithium 3V battery is considered almost dead when it drops below 3V. The protection circuit usually triggers a low-voltage protection point at around 2.3-3V. There is very little capacity remaining below 3V. When using lithium batteries, it’s advisable to avoid triggering the protection circuit as it ensures safety.
Typically, when the battery level reaches around 15%, it is considered low and should be recharged. It’s not recommended to let the battery level drop too low, especially if the device automatically shuts down when it’s out of power, as this can be detrimental to the battery’s health.
Modern lithium batteries do not have memory effects, so charging them before they are completely drained or using them without fully charging will not reduce their capacity. It is recommended, however, to occasionally perform a full charge and discharge cycle to gauge the remaining battery capacity and ensure it’s working properly.
Using voltage alone to determine the remaining battery level is not very accurate since different loads can affect the voltage. However, a rough estimation of the battery level can be achieved through voltage division using resistors and some transistors. Alternatively, directly measuring the battery voltage can provide an estimate of the battery level.
One way is to incorporate a circuit in the charger that automatically cuts off the power when the charging current falls below a certain threshold. Most Battery Management Systems (BMS) include this circuit, so when you charge your device, the battery will automatically disconnect once it’s fully charged.
You can use a constant current discharger to discharge the battery. First, charge the battery to full capacity (4.2V), let it rest for 12 hours, then discharge it with a constant current until it reaches 3.0V. Measure the discharge time in hours and multiply it by the discharge current in amperes to calculate the battery capacity. For example, if the discharge current is 0.3A and the discharge time is 8 hours, the battery capacity would be 0.3A * 8H = 2.4Ah.
A typical single 18650 lithium battery has a voltage of 3.7V. When you connect 7 of them in series, the voltages add up, resulting in a total voltage of 26V. The capacity remains the same at 15Ah.
12Ah = 12 coulombs/second * 3600 seconds = 43,200 coulombs.
The amount of energy a battery can provide is independent of its voltage.
As we know building or upgrading a power backup system can be overwhelming, so we’re here to help. Our NPP Global team-based sales and custom lithium battery technical team is standing by at (+86)20-37887390 to take your questions!
Find us around the world, we’re ready to meet you! Check out the NPP Exhibition Calendar, and come chat with our technical specialists and members of the NPP family! Or get in touch at info@npplithium.com.
Also, join us on Facebook, LinkedIn, and Youtube to learn more about how lithium battery systems can power your lifestyle and business.